Messages
124
Account setting
: you can configure up to 5 e-mail
accounts using different e-mail servers. The following
options are available for each account:
Account name: enter a name for the selected account.
In use: select this option to use the selected account.
You need to check this option to display this account in
the Inbox.
User name: enter the name to be displayed in your
outgoing messages as the sender’s name.
Email address: enter your e-mail address.
SMTP server: enter the IP address or domain name of
the server to be used for sending messages. Your e-mail
service provider can give you this information.
SMTP port: enter the SMTP port number. Your e-mail
service provider can give you this information.
Protocol type: specify an e-mail protocol type for the
incoming server, either
POP3
or
IMAP4
. Contact your
e-mail service provider for more information.
The remaining options depend on the protocol type
setting.
When the protocol type is set to
POP3
:
POP3 server: enter the IP address or domain name of
the server to be used for receiving messages. Your e-
mail service provider can give you this information.
POP3 port: enter the POP3 port number.
APOP login: when this option is checked, you can
connect to the server by using the APOP login scheme.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
When the protocol type is set to
IMAP4
:
IMAP4 server: enter the IP address or domain name of
the server to be used for receiving messages.
Summary of Contents for SGH-D500
Page 2: ...GPRS TELEPHONE SGH D500 ...
Page 3: ......