Samsung SF4500 User Manual Download

Page: 83 / 93

.21

Maintenance

roubleshooting

Cartridge Alignment

You should print the alignment pattern if vertical lines or characters appear
crooked. The alignment printing lets you straighten the vertical lines.

On Your Machine Control Panel:

1. Press

Menu

, then press

System Setup

on the One-Touch keypad.

2. Press

repeatedly, until the display shows ÔARRANGE

ALIGNMENT?Õ.

3. Press

Enter.

Alignment pattern is printed.

4. Examine the printed pattern, and select the closest straight line for Draft

Mode and Normal Mode.

5. Press the straight (or the closest) line number for Draft mode

when the

display prompts you to enter number for DRAFT ALIGNMENT.

6. The display prompts you to enter number for NORMAL ALIGNMENT.

Press the straight (or the closest) line number for Normal Mode.

7. The display asks if you want to repeat alignment.

If there are no lines

straight, press

to select YES, and repeat the procedure until you get a

straight line.

8. When alignment is complete, press

to select NO when the display

shows ÔREPEAT ALIGNMENT.Õ

The machine returns to Standby mode.

A - Draft Mode Alignment

B - Normal Mode Alignment

Summary of Contents for SF4500






























































































Search results

Summary of Contents for SF4500

Reviews:

Related manuals for SF4500

Brands by name

Popular brands

Samsung SF4500, User Manual

Search results

Summary of Contents for SF4500

Reviews:

Related manuals for SF4500

Brands by name

Popular brands