Samsung SF-3100, User Manual

Page: 61 / 111

Special Features
6-3
Chapter 6
To Insert a Pause
With some private telephone systems, you must dial an access
code (9, for example) and listen for a second dial tone before
dialling an outside number. In such cases, you must insert a
pause in the number when you are registering Auto Dial such
as a One-Touch or Speed Dial number.
If you are asked for the number when setting up Auto Dial,
follow this procedure:
1
Press Redial/Pause to insert a 4-second pause
while entering the number.
A ‘P’ is inserted at the point where you pressed
Redial/Pause. If you need a longer pause, press
Redial/Pause as many times you want.
Using Recall
If you get a call and you want to transfer it to someone else,
press Recall and dial the number of that other person. This
may not work with some phone systems. Refer to your
telephone’s instruction manual for more information. The
recall is of “Time break” type.
1
Press Recall when you are on the telephone.
2
Enter the phone number to transfer it to
someone else.
You may have some problems when you try to
use BT services.
3
Hang up the handset when the person answers.
Note
If you do not have a special service that uses the switch-
hook signal, do not press Recall during a call. If you do, you
could disconnect the line.