Samsung SF-3100 User Manual Download Page 52

Page: 52 / 111

Advanced Fax

5-2

Broadcasting

With Broadcasting you can programme your machine to
automatically scan and send documents to a number of
different recipients. The documents are automatically erased
from memory when Broadcasting is finished.

Turn the document face down and feed it into

the machine.

Press Advanced FAX and select

‘BROADCASTING’ by pressing

➛

❿

Press Start/Enter.

The display asks you to enter the fax number of
the remote machine.

Enter the fax number.

You can use any Auto Dial key such as One-
Touch, Group Dial, or two-digit Speed Dial
location number.

Press Start/Enter when the correct number

appears in the display.

•

If you have more destinations, select ‘Y (Yes)’ and

press Start/Enter when asked ‘ANOTHER? Y/N’
and repeat steps from 4.

•

If you have finished entering all the numbers, answer

‘N (No)’ and press Start/Enter.

Summary of Contents for SF-3100
















































































































Search results

Summary of Contents for SF-3100

Reviews:

Related manuals for SF-3100

Brands by name

Popular brands

Samsung SF-3100, User Manual

Search results

Summary of Contents for SF-3100

Reviews:

Related manuals for SF-3100

Brands by name

Popular brands