background image

1

 · Appendix

If you have problems with the system, there is often a quick and simple solution. Please 

try the following:

Troubleshooting

Problem

Solution 

No picture from a 

camera

Check all connections to the camera. Make sure the adapter is plugged in.

Make sure that the cameras and receiver are both ON.

Make sure that the camera is in range of the receiver.

If using the battery adapter, try replacing the batteries.

Make sure the camera and monitor are paired.

1.
2.
3.
4.
5.

The picture is 

dropping

Move the camera closer to the receiver.

Try repositioning the camera, receiver or both to improve the reception.

Adjust the monitor antenna to vertical position.

1.
2.
3.

Audio problems

Ensure that the volume on the TV is on.

Make sure that there is sound within range of the camera microphone.

If the unit emits a loud screeching noise (feedback), move the camera or 

receiver farther apart.

1.
2.
3.

The picture is or has 

become choppy

The picture may become choppy when experiencing a lower frame rate  

(i.e. 10 frames per second vs. a higher 20 frames per second).

Try moving the camera closer to the receiver.

Remove obstructions between the receiver and camera.

Adjust the monitor antenna to vertical position.

1.
2.
3.

The Picture appears 

to be grainy  when 

using AV out function 

to view on a large 

screen TV/Monitor

The purpose of the AV output is for convenience only. When using with large 

screen TV/Monitor, the picture might be grainy as the camera limits video 

resolution to VGA.
This is not a product defect.

For best performance use with TV/Monitor PIP (Picture in Picture) function. 

Check your TV/Monitor product manual to see if this feature is available on 

your TV/Monitor.

View video on a smaller screen TV/Monitor.

1.

2.

Low batteries will cause the supply current to become unstable and will affect the quality of the 

video/audio. Please charge the battery fully or replace the batteries for use for superior video.

n

`

Correct Disposal of This Product

  

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection 

systems)
This marking on the product, accessories or literature indicates that the product and its 

electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with 

other household waste at the end of their working life. To prevent possible harm to the 

environment or human health from uncontrolled waste disposal, please separate these 

items from other types of waste and recycle them responsibly to promote the sustainable 

reuse of material resources.
Household users should contact either the retailer where they purchased this product, or 

their local government office, for details of where and how they can take these items for 

environmentally safe recycling.  
Business users should contact their supplier and check the terms and conditions of the 

purchase contract. This product and its electronic accessories should not be mixed with 

other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return 

systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product 

should not be disposed of with other household waste at the end of their working life. Where 

marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, 

cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not 

properly disposed of, these substances can cause harm to human health or the environment. 
To protect natural resources and to promote material reuse, please separate batteries from other 

types of waste and recycle them through your local, free battery return system.

Samsung Techwin cares for the environment at all product manufacturing stages, and is 

taking measures to provide customers with more environmentally friendly products. 

The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly 

products, and indicates that the product satisfies the EU RoHS Directive. 

Summary of Contents for SEW-3034WN

















Reviews: