Samsung SDS-P5101 User Manual Download

Page: 123 / 135

APP
end
Ix

Symptom

Countermeasures

Recording does not work.

If your player does not display a Live image at all, that indicates

recording does not work so first check if you see an image on the

screen.

Recording does not work if the recording settings are not properly

configured.

1) Manual Record: Press the [

REC

] button on the remote control to start

recording.

2) Scheduled Record: Specify a desired time in Menu – Record -

Recording Schedule. Recording will start at the specified time.

- <

Continuous

> Record: Recording will proceed in any conditions at

the specified time.

- <

Event

> Record: When an event occurs, recording will perform

only if the event is of alarm, motion detection and video loss.

If there is no event found, recording will not perform.

- <

Continuous / Event

> Record: If there is no event found,

Continuous recording will perform. Whereas, if an event occurs,

Event recording will perform.

The image quality of the recording data is not good.

Increase the resolution and quality level in Menu – Record – Quality /

Resolution.

1) Resolution: Select a bigger size when specifying the recording size.

(4CIF>2CIF>CIF)

The recording image in the CIF format shows a deteriorated quality as

it is enlarged from a small-sized image.

2) Record Quality: Specify a bigger level for the recording quality.

If you increase the resolution and the recording quality, the data size

increases accordingly. So the HDD will be filled faster. Overwriting will

overwrite the existing data so recording will proceed at a shorter interval.

English

_123

Summary of Contents for SDS-P5101








































































































































Search results

Summary of Contents for SDS-P5101

Reviews:

Related manuals for SDS-P5101

Brands by name

Popular brands

Samsung SDS-P5101, User Manual

Search results

Summary of Contents for SDS-P5101

Reviews:

Related manuals for SDS-P5101

Brands by name

Popular brands