English
_45
!
main menu
SeTTinG THe DeViCe
You can configure the settings of: Camera, Storage Device, Remote Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
1.
Press the [
menu
] button on the remote control.
2.
Use the left/right button (
_ +
) to select <
Device
>.
Device setting menu is selected.
3.
Use the up/down buttons (
$%
) to move to <
Camera
>,
and press [
enTeR
] button.
4.
Select <
Camera
>.
You will see a window where you can configure the
camera settings including Video, Audio, Channel Name,
SEQ-Dwell Time and Privacy Region.
5.
Use direction buttons (
$%_ +
) to move to a desired
item, and set the value.
•
Video
- <
On/OFF
> : You can turn ON/OFF the selected channel’s
camera.
- <
Covert1
> : Shows information other than the video of
the selected channel.
`
For privacy protection, it does not display the video while the recording continues.
- <
Covert2
> : Shows nothing but an empty screen while the recording continues.
•
Audio
- If set to <
On
>, you can turn the audio of the channel ON on the Live screen.
- If set to <
OFF
>, the channel’s audio is off on the Live screen and not recorded.
•
CH Name : Up to 15 characters including blanks are allowed.
`
Refer to “
Using Virtual Keyboard
”. (Page 36)
•
SEQ-Dwell Time : You can set the dwell time between channels for the Live screen.
`
If set to <
OFF
>, the channel is not listed in the Auto Sequence mode.
Device
Logout
Return
Camera
Storage Device
Remote Device
Monitor
CH
Video
Audio
CH Name
SEQ-Dwell Time
1
ON
OFF
CAM 01
5 sec
2
ON
OFF
CAM 02
5 sec
3
ON
OFF
CAM 03
5 sec
4
ON
OFF
CAM 04
5 sec
5
ON
OFF
CAM 05
5 sec
6
ON
OFF
CAM 06
5 sec
7
ON
OFF
CAM 07
5 sec
8
ON
OFF
CAM 08
5 sec
Camera
Previous/Next Page
Screen Setup
OK
Cancel
Camera
Privacy Region
