Samsung SDE-120N User Manual Download Page 49

Page: 49 / 94

English

_49

DVR SETUP

Select a desired event recording mode.

NONE: Does not perform recording.

CONTINUOUS: Performs the recording continuously.

MOTION: Performs the recording only if a motion is detected.
To record a motion, set both <

SENSITIVITY

> and <

AREA SETUP

> in "

CAMERA > MOTION

SENSOR

". (Page 31)

CONTINUOUS/MOTION: Performs both continuous and motion recording modes.

Press the <

> button.

The color of the specified area will be changed to the color of the specified record type.

When your settings are completed, press the <

APPLY

> button on the bottom.

Your settings will be applied.

Press the <

> button to display the confirmation dialog and return to the previous menu.

ALARM RECORDING

You can specify the recording size and the quality that will be applied if an alarm event occurs.

Using the mouse may help easy setup.

Use the direction buttons to move to <

ALARM

RECORDING

> in the left corner of the RECORD setup

screen and press the [

ENTER

] button.

From the <

TIME

> bar, select a cell that you want to

adjust the size.
The size adjustment window appears.

Use direction buttons (▲▼◄►) to move to a desired
item, and press the [

ENTER

] button to set the value.

SIZE: Set the recording resolution.

FPS: Set the frame rate per second.

QUALITY: Set the recording quality.
Select one from LOW/STANDARD/HIGH/HIGHEST.
The recordable time may differ, depending on the recording quality.

AUDIO: Select whether to include audio input to the recording.

ALARM: Select an alarm input port.

Remaining Rate: If you change the settings of the resolution and the remaining rate, the frame rate
available for each resolution will be recalculated.

Press the <

> button.

When your settings are completed, press the <

APPLY

> button on the bottom.

Your settings will be applied.

Press the <

> button to display the confirmation dialog and return to the previous menu.

•
•
•

•

•
•
•

CANCEL

APPLY

RECORDING
OPERATIONS

CONTINUOUS/
MOTION
RECORDING

ALARM
RECORDING

RECORD

INSTANT
RECORDING

SIZE/FPS/QUALITY

TIME

ACTIVATION

0 6

ALARM

CANCEL

APPLY

CH 1

CH 2

CH 3

CH 4

SIZE

704×240

FPS

QUALITY

AUDIO

HIGHEST

OFF

CANCEL

3 remained

ALARM

Lo-Call 1890 866 900

www.cctvireland.ie

Summary of Contents for SDE-120N































































































Search results

Summary of Contents for SDE-120N

Reviews:

Related manuals for SDE-120N

Brands by name

Popular brands

Samsung SDE-120N, User Manual

Search results

Summary of Contents for SDE-120N

Reviews:

Related manuals for SDE-120N

Brands by name

Popular brands