Samsung SDE-120N User Manual Download Page 46

Page: 46 / 94

46_

DVR setup

DISK MANAGEMENT

You can specify the recording auto deletion and overwrite options and format the HDD recording data.
See the previous section to repeat steps 1~3. (Page 25)

Use the direction buttons to move to the upper <

DISK

MANAGEMENT

> icon and press the [

ENTER

] button.

The DISK MANAGEMENT screen appears.

Use direction buttons (▲▼◄►) to move to a desired
item, and press the [

ENTER

] button to set the value.

AUTO DELETE: Specify the auto deletion period. You
can search for recording data only in that specified
period.

- The Auto Delete function is available only if

OVERWRITE is set to ON.

- The NTSC-type model does not support the function

of AUTO DELETE.

If there remains a large-sized data file, setup may take
a while. Note that recording will be disabled until setup
is completed.

It will be disabled if OVERWRITE is set to OFF.

OVERWRITE

If set to <

>, recording will proceed by overwriting

the existing data even if the size of the recording data
exceeds the HDD capacity.

If set to <

OFF

> and the HDD is full, the DVR stops

recording and sounds the buzzer or alarm that is set
to operate in <

EVENT / SENSOR

>. (Page 42)

A message of "

DISK FULL

" is displayed on the screen.

FORMAT: Format the hard disk drive.

①

Press the <

START

> button.

②

You will see the alert that recording data can be deleted.

③

Press the <

> button.

Note that formatting the HDD will delete all existing data.

When your settings are completed, press the <

APPLY

> button on the bottom.

Your settings will be applied.

Press the <

> button to display the confirmation dialog and return to the previous menu.

•



•



DISK MANAGEMENT

DISK

MANAGEMENT

CANCEL

APPLY

DISK MANAGEMENT

OVERWRITE

AUTO DELETE

FORMAT

OFF

START

DISK

MANAGEMENT

CANCEL

APPLY

DISK MANAGEMENT

OVERWRITE

AUTO DELETE

FORMAT

OFF

START

WARNING

All recorded data will be removed.

Do you want to continue?

CANCEL

Lo-Call 1890 866 900

www.cctvireland.ie

Summary of Contents for SDE-120N































































































Search results

Summary of Contents for SDE-120N

Reviews:

Related manuals for SDE-120N

Brands by name

Popular brands

Samsung SDE-120N, User Manual

Search results

Summary of Contents for SDE-120N

Reviews:

Related manuals for SDE-120N

Brands by name

Popular brands