Samsung SDE-120N User Manual Download Page 34

Page: 34 / 94

34_

DVR setup

When the ADD SEQUENCE window appears, press the
<

ADD

> button.

When the SEQUENCE SETUP window appears, Use
direction buttons (▲▼◄►) to move to a desired item,
and press the [

ENTER

] button to set the value.

VIEW TYPE: Select a split mode to sequence.

CONFIGURE: Select a channel to display on each split
screen.

Press the <

CONFIRM

> button.

The set sequence mode will be confirmed and displayed
on the ADD window.

When completed, press the <

ADD

> button on the

bottom.
The set sequence type will be saved and you will move to
the previous screen.

EDITTING SEQUENCE

Select a list to edit.
The EDIT window appears.

Use direction buttons (▲▼◄►) to move to a desired
item, and press the [

ENTER

] button to set the value.

SEQUENCE TITLE : Select the TITLE input box.

ACTIVATION : Set to perform the sequence.

MODIFY : You can change the sequence mode setting.

For setting the sequence mode, refer to “

ADDING

SEQUENCE

”. (Page 33)

DELETE : Deletes the selected sequence list.

CANCEL : Cancels your changes.

When your settings are completed, press the <

APPLY

> button on the bottom.

Your settings will be applied.

Press the <

> button to display the confirmation dialog and return to the previous menu.

•
•

•
•
•



•
•

ADD

OSD

MONITOR

SEQUENCE

ADD

APPLY

DISPLAY

ACTIVATION

CANCEL

SAVE

EDIT

SEQUENCE TITLE

ACTIVATION

MODIFY

CANCEL

DELETE

ABC

OFF

CREATED BY

admin

SEQUENCE SETUP

VIEW TYPE

CONFIGURE

CONFIRM

CANCEL

ADD

Lo-Call 1890 866 900

www.cctvireland.ie

Summary of Contents for SDE-120N































































































Search results

Summary of Contents for SDE-120N

Reviews:

Related manuals for SDE-120N

Brands by name

Popular brands

Samsung SDE-120N, User Manual

Search results

Summary of Contents for SDE-120N

Reviews:

Related manuals for SDE-120N

Brands by name

Popular brands