Samsung SCZ-3370, User Manual

Page: 23 / 56

English_23
●
CAMERA OPERATION
ft
▶
DIRECTION
x
IN: Detect any object that enters the specified fence area.
x
OUT: Detect any object that exits from the specified fence area.
x
IN/OUT: Detect any object that enters or exits from the specified fence
area.
▶
RETURN: Save the fence position settings and return to the
INTELLIGENCE menu.
- FIXED/MOVED: Detect if an existing object (on the screen) disappears or if an object
appears from nowhere and stays for a certain time.
In following situations, FIXED/MOVED detection may not work properly.
y
If multiple motions continue at random.
y
If a fixed object continues to move in the same position.
y
If a newly appearing object conceals another object that is moving.
DETECT BOX : Display an object in a box that is detected to move in your specified type.
ALARM OUT : Output the detection signal through the rear port of the camera if an
object is detected to move in your specified type.
SMART ZOOM :
Smart zoom is operated in connection with
MOTION DETECTION. When the SMART
ZOOM function is ‘ON’ while the MOTION
DETECTION mode is ‘ON’, the zoom goes
to the TARGET ZOOM position once motion
is detected. Once the zoom action is finished
and ‘DWELL TIME’ has passed, the zoom returns to the ‘START ZOOM’ position.
- START ZOOM : By moving the left or right button in the ‘START ZOOM’ item
to select the zoom position from 1x to 37x to be returned
after the ‘SMART ZOOM’ action is over.
- TARGET ZOOM : Use the left or right button in the ‘TARGET ZOOM’ item to
select the zoom position from 1x to 37x to be used during
MOTION DETECTION.
- DWELL TIME : Use the left or right button in the ‘DWELL TIME’ item to
select a time between 5 and 60 seconds for the dwell time
before the zoom is returned to the ‘START ZOOM’ position.
(5,7,10,15,20,30,40,60 sec)

y
y
y
SMART ZOOM SETUP
▶ START ZOOM X1
TARGET ZOOM X5
DWELL TIME 5 SEC
RETURN