_
setup
setup
Select the preset number.
Select <
POSITION
> and adjust <
PAN/
TILT/ZOOm
> to the desired setup using
the joystick.
Set <
PRESET ID
> to <
ON
> and enter the
name.
For entering the name, refer to “
CAMERA ID
”.
(page 24)
Select <
PRESET SPEED
> and adjust the
pan/tilt speed of the preset.
Set the <
DWELL TImE
> that defines the
camera's hold duration and <
ImAGE HOLD
> of the preset.
If you set the <
IMAGE HOLD
> to <
ON
>, the video image will be held still until the
camera reaches the preset position.
Set <
CAmERA SET
> to <
ON
>.
You can adjust camera setups for each
preset.
For details on setting <
IRIS
>, <
WHITE BAL
>
and <
FOCUS MODE
>, refer to “
CAMERA
SET
”. (pages 24 ~ 32)
The preset position can be specified for a
tilt range of between 0° and 90°.
Those presets that are out of a tilt of 90° can not be specified.
If you try to specify a preset position for a range exceeding a tilt of 90° using a
controller (SSC-1000, 2000 or 5000), you will see a message of <
SET AGAIN
> on
the screen. If this is the case, try again for a range below a tilt of 90°.
If you upload/download the menu setting using SSC-1000, 2000 or 5000, the preset
may differ from the menu setting so define the preset again after the operation.
2.
3.
4.
5.
6.
7.
M
PRESET
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
1/16
PRESET NO. 1
POSITION
PRESET ID
ON
PRESET SPEED
[5]
DWELL TIME
3SEC
IMAGE HOLD
OFF
CAMERA SET
ON
CAMERA SET
IRIS
ALC
WHITE BAL
FOCUS MODE
MF
