84_
troubleshooting
troubleshooting
Problem
Cause and Solution
Page
"Auto Refresh(Wait)" appears
and the camera reboots.
► Such symptoms may occur if the camera's temperature increases from
-10º or lower to -10º or higher to prevent the malfunction of motor.
7
“Please Check Heater System”
appears.
► The heater may malfunction. Turn off the camera and call where you
bought.
7
Check the Power cord’s by periods
The Power cord’s coating has
been damaged.
The power cord is hot to touch
when the product is in operation.
The power cord gets hot after
being folded or pulled on.
y
y
y
Continuing to use the product when its power cord is damaged constitutes an
electrical and fire hazard. The power plug must be removed from the outlet
immediately, and a qualified service personnel or your system provider should be
contacted for assistance.
-
