3-19
E
3-18
SET END!
END SET
"END SET" gets into the END SET setup screen by
pressing [ENTER]. Adjust PAN/TILT location and
press [ENTER] to return to a higher menu.
DIRECTION
Set up the movement direction of the START to END location (PAN location standard)
"RIGHT " :
"LEFT " :
ENDLESS
This is a 360-degree rotation function that only stops for the DWELL TIME in the START and
END positions. It can be set to "ON" or "OFF".
SPEED
This is a setting function for movement speed setup. It can be set from STEP1 to
STEP64.
DWELL TIME
This is a function for setting up the time to stay in the START to END position.
SET START!
AUTO MODE
AUTO PAN and PATTERN functions are in AUTO MODE.
AUTO PAN
After selecting the locations of two points (PAN/TILT) of START and END, it loops
continuously in the set up SPEED.
START SET
From "START SET..." get into the START SET setup
screen by pressing [ENTER]. After selecting the
locations of PAN/TILT location, press [ENTER] again to
return to higher menu.
Press
[Enter]
Press
[Enter]
** MAIN MENU **
CAMERA...
VIDEO SET...
PRESET...
AUTO MODE...
ALARM SET...
OTHER SET...
(AUTO MODE)
AUTO PAN ...
PATTERN SET 1...
RET
AUTO PAN
START SET
...
END SET
...
DIRECTION
RIGHT
ENDLESS
ON
SPEED
STEP5
DWELL TIME
2 S
EXIT
QUIT
Summary of Contents for SCC-641 - 22x Zoom Smart Dome Camera
