Samsung SCC-1000, User Manual

Page: 5 / 13

PTZ CONTROLLER User Guide
8
PTZ CONTROLLER User Guide
9
①
③ ④ ⑥
② ⑤
① ESC / POWER Cancels a command or turns power on/off.
②
LCD DISPLAY 16 X 2 LCD
③
Number Pad Enables changing channels or opening and closing the camera OSD.
④
1. LOCK
2. FN
3. AUX
4. SET
5. OPEN
6. CLOSE Locks out the system.
Function keys: Perform special functions in combination with other buttons.
Controls the camera’s AUX output.
Enters the controller settings menu.
IRIS OPEN
IRIS CLOSE
⑤
1. P-SET
2. SWING
3. GROUP
4. A/F
5. OSD
Sets up and moves to preset locations.
Commands the camera to move between 2 selected locations while
panning or tilting.
Commands the camera to monitor preset locations at a selected speed
and standby time in an orderly manner.
Performs the One-Shot AF function.
Indicates the camera’s OSD menu.
⑥
1. FOCUS -/+
2. ZOOM W/T Manually focuses the camera.
Zooms the camera in or out.
Names and Functions
Controlling PTZ Camera
1. Power
2. Initial Screen Display
3. Camera ID Setup
①
To turn on the power, press the PWR button.
② To turn off the power, hold down the PWR button.
①
ID : Indicates the current channel number.
②
SPD : Indicates the current channel camera protocol.
③
9.6k : Indicates the current channel camera baud-rate.
①
Using the number pad, enter a number.
②
Press the ENT button to confirm the Camera ID.
• Camera IDs are between 1 to 255.