Samsung SC-D530 Owner'S Instruction Book Download

Page: 78 / 114

ENGLISH

Playing back a Tape

✤

The PLAY/STILL, STOP, FF, REW buttons are located on the camcorder and the Remote Control.

✤

The F.ADV(Frame advance), SLOW buttons are located on the Remote Control only.

✤

To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for more
than 5 minutes.

Playback pause

✤

Press the

(PLAY/STILL) button during Playback or Slow playback.

✤

To resume playback, press the

(PLAY/STILL) button.

Picture search (Forward/Reverse)

✤

Press the

(FF) or

(REW) buttons once during Playback mode, Still mode or Slow mode.

To resume normal playback, press the

(PLAY/STILL) button.

✤

Keep pressing

(FF) or

(REW) buttons during Playback mode.

To resume normal playback, release the button.

Slow playback (Forward/Reverse)

✤

Forward Slow Playback

■

Press the SLOW button on the Remote Control during Playback.

■

To resume normal playback, press the

(PLAY/STILL) button.

✤

Reverse slow playback

■

Press the

button during Forward Slow Play back.

■

To resume forward slow playback, press the

button.

■

To resume normal playback, press the

(PLAY/STILL) button.

ADE

.SHO

DELETE

FWD

REV

BLC

BATT.RELEASE

Various Functions while in PLAYER mode

Summary of Contents for SC-D530



















































































































Search results

Summary of Contents for SC-D530

Reviews:

Related manuals for SC-D530

Brands by name

Popular brands

Samsung SC-D530, Owner'S Instruction Book

Search results

Summary of Contents for SC-D530

Reviews:

Related manuals for SC-D530

Brands by name

Popular brands