ENGLISH
56
56
Advanced Recording
●
DATE/TIME
✤
The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes.
✤
The date and time are automatically recorded on a special data area of the tape.
1. Press the MENU button.
■
The menu list will appear.
2. Move the MENU SELECTOR to highlight VIEWER and push the MENU SELECTOR.
3. Move the MENU SELECTOR to highlight DATE/TIME.
4. Push the MENU SELECTOR to select the sub-menu.
5. Using the MENU SELECTOR, select the DATE/TIME mode.
✤
You can choose between the OFF, DATE, TIME, and DATE&TIME modes.
■
OFF
■
DATE only
■
TIME only
■
DATE & TIME
✤
To return to the previous menu, highlight DATE/TIME in the middle of the menu and
push MENU SELECTOR.
6. To exit, press the MENU button.
Notes
■
The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) menu.
■
The DATE/TIME will read “- - -” in the following conditions.
-
During playback of a blank section of a tape.
-
If the tape was recorded before setting the DATE/TIME in the Camera’s memory.
-
When the lithium battery becomes weak or dead. (see page 10)
■
Before you can use the DATE/TIME function, you must set the Clock. See CLOCK SET on page 36.
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
DISPLAY
CAM MODE
INITIAL
LCD ADJUST
DATE / TIME
DISPLAY
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
DATE / TIME
VIEWER SET
DATE
TIME
DATE&TIME