Samsung SC-D530 Page 14 Owner'S Instruction Book Download

Page: 14 / 114

ENGLISH

Notes and Safety Instructions

1. The camcorder’s built-in lithium battery maintains the clock function and user settings, even if the battery pack or AC adapter

is removed.

2. The lithium battery for the camcorder lasts about a week under normal operation from the time of installation.

3. When the lithium battery becomes weak or is dead, the date/time indicator will display “– – –” when you set the DATE/TIME

to ON.
When this occurs, connect the camcorder to power to fully recharge the built-in lithium battery. If the same problem occurs
with a fully recharged battery, contact a Samsung authorized Service Center to replace the battery.

Precautions regarding the external lithium battery for the remote control

Warning:

■

Keep the LITHIUM BATTERY(Remote Control) out of reach of children.
Should a battery be swallowed, consult a doctor immediately.

■

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

Precautions regarding the Lithium battery

Summary of Contents for SC-D530



















































































































Search results

Summary of Contents for SC-D530

Reviews:

Related manuals for SC-D530

Brands by name

Popular brands

Samsung SC-D530, Owner'S Instruction Book

Search results

Summary of Contents for SC-D530

Reviews:

Related manuals for SC-D530

Brands by name

Popular brands