Samsung SC-D362, Service Manual

Page: 40 / 244

4-10
Disassembly and Reassembly
Samsung Electronics
4-2-4 Arm Tension Ass’y, Reel Disk S
4-2-4(a) Disassembly
Note 1 : When disassembling, take care not to deform
the part. Do not stain the post.
1) Separate the Spring Tension
Œ
from Hook of Sub
Chassis.
2) Remove the Washer Slit
ˇ
, and then lift up the Arm
Tension
¨
.
3) Lift up the Reel Disk S
ˆ
.
Fig. 4-10 Arm Tension Ass’y, Reel Disk S
4-2-4(b) Reassembly
1) Mount the Reel Disk S
ˆ
.
2) After pushed Arm Tension Ass’y
¨
in the direction
“A”, and then insert into the Pin
Ø
.
3) Insert the Washer Slit
ˇ
, and then hang the Spring
Tension
Œ
to Sub Chassis Hook
´
and Arm Tension
Hook
∏
.
Note 1 : When reassembling or dsiassembling,
position of Spring Tension
Œ
is same.
Note 2 : When moving inspecting, must be inspect
Back Tension.
Note 3
: When reassembling, confirm that pin of Arm
Tension insert into the Guide Cam.
WASHER SLIT
ˇ
SPRING TENSION
Œ
PIN
Ø
SUB CHASSIS HOOK
´
¨
ARM TENSION ASS'Y
∏
ARM TENSION HOOK
ˆ
REEL DISK S