Samsung SC-D351, Service Manual

Page: 34 / 168

4-10
Disassembly and Reassembly
Samsung Electronics
4-2-5 Arm Tension (=Tension Arm) Ass’y, Reel Disk S
4-2-5(a) Disassembly
1) Separate the Spring Tension (=Tension Spring) Œ
form Hook of Main Chassis.
2) Remove the Washer Slit ˇ , and then lift up the Arm
Tension (=Tension Arm) ¨ .
3) Lift up the Reel Disk S ˆ .
Fig. 4-15 Arm Tension (=Tension Arm) Ass’y, Reel Disk S
4-2-5(b) Reassembly
1) Mount the Reel Disk S ˆ .
2) Push the Arm Tension (=Tension Arm) Ass’y ¨
in the direction “A”, and then insert into the Pin
Ø
.
3) Insert the Washer Slit ˇ , and then attach the Spring
Tension (=Tension Spring) Πto Main Chassis Hook
´ and Arm Tension Hook ∏ .
4
"A"
3
SPRING TENSION (=TENSION SPRING)
Œ
ARM TENSION (=TENSION ARM) HOOK
∏
PIN
Ø
MAIN CHASSIS HOOK
´
¨
ARM TENSION (=TENSION ARM) ASS'Y
ˆ
REEL DISK S
ˇ
WASHER SLIT
Note 1 : When disassembling, take care not to deform
any part. Do not stain the post.
Note 1 : When reassembling or disassembling,
position of Spring Tension (=Tension
Spring)
Πis same.
Note 2 : When inspecting the motion, Forward and
Reverse Tensions must be inspected.
Note 3 : When reassembling, confirm that the bending
of the Arm Tension (=Tension Arm) is
inserted into the Guide Cam.