Samsung SC-D305 Page 29 Owner'S Instruction Book Download

Page: 29 / 111

ENGLISH

Preparation

Using the Lithium Ion Battery Pack

Table of continuous recording time based on model and battery type.

✤

If you close the LCD screen, it switches off and the viewfinder switches on automatically.

✤

The continuous recording times given in the table below are approximations.
Actual recording time depends on usage.

Notes

■

The battery pack should be recharged in an environment of between 32°F (0°C) and 104°F (40°C).

■

The battery pack should never be charged in a room temperature that is below 32°F (0°C).

■

The life and capacity of the battery pack will be reduced if it is used in temperatures below 32°F (0°C) or left in temperatures
above 104°F (40°C) for a long period, even when it is fully recharged.

■

Do not put the battery pack near any heat sources (fire or flames, for example).

■

Do not disassemble, process, press, or heat the Battery Pack.

■

Do not allow the + and - terminals of the battery pack to be short-circuited. It may cause leakage, heat generation, induce
fire and overheating.

Battery

SB-LS110

SB-LS220

Charging

time

Approx.

2hr

Approx.

3hr 30min

LCD ON

VIEWFINDER ON

Continuous recording time

Time

Approx.

1hr 30min

Approx.

3hr 10min

Approx.

2hr

Approx.

4hr 10min

00752C SCD303 SEA (01~27) 3/2/04 11:27 AM Page 25

Summary of Contents for SC-D305
















































































































Search results

Summary of Contents for SC-D305

Reviews:

Related manuals for SC-D305

Brands by name

Popular brands

Samsung SC-D305, Owner'S Instruction Book

Search results

Summary of Contents for SC-D305

Reviews:

Related manuals for SC-D305

Brands by name

Popular brands