Samsung SC-D305 Page 75 Owner'S Instruction Book Download

Page: 75 / 111

ENGLISH

Playback

✤

The PLAY/STILL, STOP, FF, REW buttons are located on the camcorder and the Remote Control.

✤

The F.ADV(Frame advance), X2, SLOW buttons are located on the Remote Control only. (SCD305/D307 only)

✤

To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for more
than 5 minutes.

Playback/Pause

✤

Press the

(PLAY/STILL) button during Playback.

✤

To resume playback, press the

(PLAY/STILL) button.

Picture search (Forward/Reverse)

✤

Press the

(FF) or

(REW) buttons during Playback or Still mode.

To resume normal playback, press the

(PLAY/STILL) button.

✤

Keep pressing

(FF) or

(REW) buttons during Playback or Still mode.

To resume normal playback, release the button.

Slow playback (Forward/Reverse) (SCD305/D307 only)

✤

Forward Slow Playback

■

Press the SLOW button on the remote control during Playback.

■

To resume normal playback,
press the

(PLAY/STILL) button.

✤

Reverse Slow Playback

■

Press the

(_) button during Forward Slow Play back.

■

To resume forward slow playback, press the

(+) button.

■

To resume normal playback, press the

(PLAY/STILL) button.

Various Functions while in PLAYER mode

REC SEARCH

FADE

BLC

REV

FWD

S.SHOW

EASY

MULTI DISP.

00752C SCD303 SEA (60~106) 3/2/04 11:31 AM Page 71

Summary of Contents for SC-D305
















































































































Search results

Summary of Contents for SC-D305

Reviews:

Related manuals for SC-D305

Brands by name

Popular brands

Samsung SC-D305, Owner'S Instruction Book

Search results

Summary of Contents for SC-D305

Reviews:

Related manuals for SC-D305

Brands by name

Popular brands