Samsung SC-D305 Page 13 Owner'S Instruction Book Download

Page: 13 / 111

ENGLISH

Notes and Safety Instructions

Do not film with the camera lens pointing directly at the sun.
Direct sunlight can damage the CCD(Charge Coupled Device).

1. Do not position the camcorder such that the viewfinder is pointing towards the sun.

Direct sunlight can damage the inside of the viewfinder. Be careful when placing the camcorder under sunlight or near a
window exposed to sunlight.

1. The LCD display has been manufactured using high precision

technology. However, there may be tiny dots
(red, blue or green in color) that appear on the LCD display.
These dots are normal and do not affect the recorded picture
in any way.

2. When you use the LCD display under direct sunlight or outdoors,

it maybe difficult to see the picture clearly.
If this occurs, we recommend using the viewfinder.

3. Direct sunlight can damage the LCD monitor.

To ensure a steady picture while filming, check that the hand strap is properly adjusted.

Do not force your hand into the hand strap as you could damage it.

Note regarding the LENS

Notes regarding electronic viewfinder

Notes regarding ‘Record’ or ‘Playback’ using the LCD

Notes regarding the hand strap

00752C SCD303 SEA (01~27) 3/2/04 11:27 AM Page 9

Summary of Contents for SC-D305
















































































































Search results

Summary of Contents for SC-D305

Reviews:

Related manuals for SC-D305

Brands by name

Popular brands

Samsung SC-D305, Owner'S Instruction Book

Search results

Summary of Contents for SC-D305

Reviews:

Related manuals for SC-D305

Brands by name

Popular brands