78
(HDMI-CEC)
(HDMI-CEC)
is a function that enables you to control all connected Samsung devices that support
with your Samsung product remote. The system can be used only with
Samsung devices that have the feature. To be sure your Samsung device has this
feature, check if there is an logo on it.
•
Off
/
On
―
You can only control
devices using the product remote control, not the buttons on
the product.
―
The product remote control may not work under certain conditions. If this occurs, reselect
the
device.
―
works when the AV device supporting
is in the standby or on status.
―
supports up to 12 AV devices in total. Note that you can connect up to 3 devices of
the same type.
Troubleshooting for
Problem
Possible Solution
does not work.
•
Check if the device is an device. The
system supports devices only.
•
Check if the device power cord is properly
connected.
•
Check the device’s Video/Audio/HDMI cable
connections.
•
Check whether
(HDMI-CEC)
is set to
On
in the
System
menu.
•
Check whether the remote control is compatible.
•
doesn’t work in certain situations. (initial setup)
•
If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your
product off and on again.
•
Check if the function of the Anynet device is set on.
I want to start .
•
Check if the device is properly connected to the
product and check if the
(HDMI-CEC)
is set to
On
in
the
System
menu.
I want to exit .
•
Press the
SOURCE
button on the product remote control
and select a non- device.
The message
“
Disconnecting
device ...
”
appears on the screen.
•
You cannot use the remote control when you are configuring
or switching to a view mode.
•
Use the remote control after the product has completed
configuration or has finished switching to .
The device
does not play.
•
You cannot use the play function when initial setup is in
progress.
