manualshive.com logo in svg

Samsung S3P80C5, User Manual

Share
Download
Samsung S3P80C5 User Manual Download Page 50

S3P80C5/C80C5/C80C8

ADDRESSING MODES

3-1

3

ADDRESSING MODES

OVERVIEW

The program counter is used to fetch instructions that are stored in program memory for execution. Instructions
indicate the operation to be performed and the data to be operated on. 

Addressing mode

 is the method used to

determine the location of the data operand. The operands specified in instructions may be condition codes,
immediate data, or a location in the register file, program memory, or data memory.

The S3C8-series instruction set supports seven explicit addressing modes. Not all of these addressing modes are
available for each instruction:

— Register (R)

— Indirect Register (IR)

— Indexed (X)

— Direct Address (DA)

— Indirect Address (IA)

— Relative Address (RA)

— Immediate (IM)

Summary of Contents for S3P80C5








































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands