9
Preparations
Chapter 02
Installation
Attaching the Stand
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
―
Disassembly is the reverse order of assembly.
x 2
1
1
2
Put the stand base onto the stand neck as the direction
shown in the figure. Check that the stand neck is firmly
connected.
Tightly fasten the connecting screw at the bottom of
the stand base. Fasten the large screw in the middle for
assembly.
3
3
4
4
Push the assembled stand into the main body in the direction of the arrow as shown in
the figure.
Stand assembly is complete.
Caution
Do not arbitrarily remove the panel film. If not
observed, the warranty service may be restricted.
