62
This document cannot be used without Samsung's authorization
PRECAUTIONS(SAFETY WARNINGS)
■
To connect the cold water pipe to the water filtering hose
■
To repair the water line
1. Loosen and remove the
compression nut (a)
from
the water line of the refrigerator, and insert it to
the water filtering hose.
2. Tighten up the
compression nut (a)
to connect the
water filtering hose and the water line.
3. Open the main water valve and check for any
leaks.
4. If there are no leaks, dispense about 10 litres
of water or dispense the water for 6 - 7 minutes
before actually using the refrigerator to remove
impurities inside the water filtering system.
5. Secure the water line to a sink or a wall using a
clip.
CAUTION
• Do not tighten the water line excessively. Make sure the
water line is not bent, pinched, or squashed.
• Do not mount the water line on any part of the
refrigerator. This may damage the refrigerator.
NOTE
If you have to relocate the refrigerator after connecting
the water line, make sure the joined section of the water
line must is straight.
CAUTION
The water line must be repaired by a qualified professional. If you encounter a water leak, contact a local
Samsung service centre or the installer of the water line.
