5
This document cannot be used without Samsung's authorization
1. PRECAUTIONS (SAFETY WARNINGS)
●
Unplug the appliance before the changing or repairing the electric parts.
●
Use rated electronic Control equipment.
➝
Make sure to check out ModeL name, Rated voltage, Rated current,
Operation Temp, etc.
●
Upon repair, make sure that harnesses are not to be water-penetrated and
are bundled tight.
➝
Should not be detached by a certain amount of external force.
●
Upon repair, completely remove dust or other foreign substances from
housing, harness, connector, etc.
➝
To prevent fire by tracking, short, etc.
●
Check out whether water has penetrated into the electronic Control system.
➝
If there is any kind of trace, take necessary measures such as related
component change, insulation tapping, etc.
●
After repair, check out the assembled state of parts.
➝
It should be the same as the previous state.
●
Check out the surrounding conditions.
➝
Change the location, if the fridge is located at humid, wet places or the
installed state is unstable.
●
In order to reduce the risk of electric shock the appliance must be properly
grounded.
●
Do not allow consumers to overload a certain outlet.
●
Check out whether the power cord or the outlet is broken, squeezed,
chopped off or heatdeformed.
➝
Repair or replace the defective power cord/outlet immediately.
➝
Make sure the power cord is not punctuated or stomped down.
●
Do not allow consumers to keep food frayed or place bottles in the Freezer Room.
●
Do not allow consumers to repair the fridge by themselves.
●
Do not allow consumers to keep things except for food.
➝
Pharmaceutical, Chemical substances : These are not possible to be fine-
Controlled with a consumer fridge.
➝
Flammable material (alcohol, benzene, ether, LPG, etc) : possibility of
explosion.
