Samsung RF18A Series Service Manual Download

Page: 58 / 111

DISASSEMBLY AND REASSEMBLY

This document cannot be used without Samsung's authorization.

Part Name

How To Do

Descriptive Picture

Compressor

6. pplying Lokprep and connecting the Service

Ring_2 - Apply 0.05g of Lokprep onto the pipe

- Insert the service ring into the Connect, Suc.

pipe and fasten it by screwing it 360° 2 times.

7. Installing manual Lokring Tool - Install manual

Lokring Tool on the Service Ring.

8. Fastening Service Ring

- Press the ring with the Lokring tool.

- When fastening, press the ring multiple times

slowly untill the ring is fastened in the middle.

(DO NOT PRESS IT ONCE TO THE END.)

9. Check the Service Ring connection status.

When disassembling, make sure the unit turned off.

If you want to assembly, follow the reverse order.

Summary of Contents for RF18A Series
















































































































Search results

Summary of Contents for RF18A Series

Reviews:

Related manuals for RF18A Series

Brands by name

Popular brands

Samsung RF18A Series, Service Manual

Search results

Summary of Contents for RF18A Series

Reviews:

Related manuals for RF18A Series

Brands by name

Popular brands