Samsung Q25 Getting Started Download

Page: 36 / 126

■

Step 2. Configure digital sound output on the computer

1. Click

Start > Control Panel > Sounds, Speech and Audio

Devices > Sounds and Audio Devices

2. In the Device volume field on the

Volume

tab, click

Advanced

3. In the [Master Volume] dialog, click

Option > Advanced Controls

Then

Advanced

button is displayed on the bottom of the dialog.

4. Click

Advanced

, select “1 SPDIF”, then click

Close

■

Step 3. Enable S/PDIF on the DVD program

When using 5.1 channel speakers, you need to install the Power DVD

program from the DVD Installation CD separately supplied
and then change the settings as directed in these steps:

1. Run Power DVD and click the

Settings

button.

2. On the Audio tab, set the Output setting to ‘

Use SPDIF Output

’.

Now, you can enjoy home theater using DVD titles.

3-10

SAMSUNG Q25 Manual

SAMSUNG

Q25

To control volumes for your 5.1 channel speaker, use the control on the digital
amp. (Please, refer to the speaker manual.)

Summary of Contents for Q25































































































































Search results

Summary of Contents for Q25

Reviews:

Related manuals for Q25

Brands by name

Popular brands

Samsung Q25, Getting Started

Search results

Summary of Contents for Q25

Reviews:

Related manuals for Q25

Brands by name

Popular brands