7-10
SAMSUNG Q25 Manual
SAMSUNG
Q25
Display Related
Q1The LCD screen is blank.
A Adjust the LCD screen brightness. Use the <Fn> + <
>, <Fn> + <
>
keys.
Q2 The screen saver disturbs screen viewing during Media Player or
video file operation.
A Under the Media Player Options, in Player > Enable Screen Saver During Use,
uncheck the box and restart the player.
Q3 In DOS mode, changing the full screen DOS mode by pressing
ALT+Enter key displays a broken image for a short period.
A The DOS mode which supports 2 Byte characters such as Korean and Japanese
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
Q4 The screen blinks, displays noise for a short time, or the screen
resolution is changed.
A This problem may occur when you started the computer, enter or come out of
standby/hibernate mode, pressed <Fn>+<F5 / CRT/LCD> keys, connect or dis-
connect your computer to/from the docking station, or performed tasks such as
changing resolution or scanning new hardware. This may occur when you con-
nected a projector and performed one of above actions.
After a short time, the screen displays normally. When the screen resolution is
changed, configure the resolution in [Graphics Controller Properties] dialog box
again. (Refer to "Using External Display Devices" (P. 6-8).)
Q5When I connected a projector to the computer and pressed
<Fn>+<
> keys, display devices are not converted properly.
A1 Press <Fn>+<
> keys once more.
A2 Convert display devices on [Graphics controller properties] dialog.
(Refer to ‘Using External Display Devices’ (P. 6-8).)
A3 Press <Ctrl>+<Alt>+<F1> keys to change the setting to CRT, or press
<Ctrl>+<Alt>+<F3> keys to change to LCD.
Q6 Extended Desktop is not configured on [Display Properties] dia-
log. (Start > Control Panel > Appearance and Themes > Display
> Settings tab)
A Change the setting to extended desktop on [Graphics Controller Properties] dia-
log. (Refer to ‘Using External Display Devices’ (P. 6-8).)
