English - 58
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1.
Press the
TOOLS
button. Press the
ENTER
E
button to select
(HDMI-CEC)
.
2.
Press the ▲ or ▼ button to select
Receiver
. Press the ◄ or ► button to select
On
or
Off
.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the Optical IN jack of the
N
receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the
N
TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1
channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
When using the Media Play feature, sound may not output properly through the receiver.
N
When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
N
If there is a power interruption to the TV when the
N
Receiver
is set to
On
(by disconnecting the power cord or a power failure), the
Speaker Select
may be set to
External Speaker
when you turn the TV on again. (see page 24)
Troubleshooting for Anynet
+
Symptom
Solution
does not work.
Check if the device is an
•
Anynet
+
device. The Anynet
+
system supports Anynet
+
devices only.
Connect only one receiver (home theater).
•
Check if the
•
Anynet
+
device power cord is properly connected.
Check the
•
Anynet
+
device’s Video/Audio/HDMI 1.3 cable connections.
Check whether
•
Anynet
+
(HDMI-CEC)
is set to
On
in the setup menu.
Check whether the TV remote control is in TV mode.
•
Check whether it is
•
Anynet
+
exclusive remote control.
doesn’t work in certain situations. (Searching channels, Plug & Play, etc.)
•
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again
•
or turn your TV off and on again.
Check if the
•
Anynet
+
Function of device is set on.
I want to start .
Check if the Anynet
•
+
device is properly connected to the TV and check if the
Anynet
+
(HDMI-CEC)
is set to
On
in the Anynet
+
Setup menu.
Press the
•
TV
button on the TV remote control to switch to TV. Then press the
TOOLS
button
to show the Anynet
+
menu and select a menu you want.
I want to exit .
Select
•
View TV
in the Anynet
+
menu.
Press the
•
SOURCE
button on the TV remote control and select a device other than Anynet
+
devices. (Note that the channel button operates only when a tuner-embedded device
is not connected.)
The message Connecting to
device...
appears on the screen.
You cannot use the remote control when you are coniguring or switching to a view
•
mode.
Use the remote control when the setting or switching to view mode is complete.
•
The device does not
play.
You cannot use the play function when
•
Plug & Play
is in progress.
The connected device is not
displayed.
Check whether or not the device supports
•
Anynet
+
functions.
Check whether or not the HDMI 1.3 cable is properly connected.
•
Check whether
•
Anynet
+
(HDMI-CEC)
is set to
On
in the Anynet
+
setup menu.
Search
•
Anynet
+
devices again.
You can connect an
•
Anynet
+
device using the HDMI 1.3 cable only. Some HDMI cables may
not support Anynet
+
functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
•
cord or a power failure, please repeat the device scan.
The TV programme cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.
•
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
•
U
Move
E
Enter
R
Return
View TV
Device List
Recording
: DVDR
DVDR MENU
DVDR INFO
Receiver
: On
Setup
2009-05-20 4:55:27
