English - 56
Setting Up Anynet
+
Anynet
❑
+
(HDMI-CEC)
Setup
Press the
T
TOOLS
button to display
Tools
menu.
You can also display menu by selecting
Tools
→
Anynet
+
(HDMI-CEC)
.
Anynet
+
(HDMI-CEC) → Off / On
To use the Anynet
+
Function,
Anynet
+
(HDMI-CEC)
must be set to
On
.
When the
N
Anynet
+
(HDMI-CEC)
function is disabled, all the related
operations are deactivated.
Auto Turn Off → No / Yes
Setting an Anynet
+
Device to turn Off Automatically when the TV is Turned Off
The active source on the TV remote must be set to TV to use the function.
N
If you set
N
Auto Turn Off
to
Yes
, connected external devices are also turned off
when the TV is turned off. If an external device is still recording, it may or may not
turn off.
Switching between Anynet
+
Devices
1.
Press the
TOOLS
button. Press the
ENTER
E
button to select
Anynet
+
(HDMI-CEC)
.
2.
Press the ▲ or ▼ button to select
Device List
, then press the
ENTER
E
button.
devices connected to the TV are listed. If you cannot ind a device you
N
want, press the red button to scan for devices.
Only when you set
N
Anynet
+
(HDMI-CEC)
to
On
in the
Setup
menu, the
Device List
menu appears.
3.
Press the ▲ or ▼ button to select to a particular device and press the
ENTER
E
button. It is switched to the selected device.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
N
The time required to scan for devices is determined by the number of connected devices.
N
If you have selected external input mode by pressing the
N
SOURCE
button, you cannot use the function. Make sure to
switch to an Anynet
+
device by using the
TOOLS
button.
Anynet
❑
+
Menu
The
Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected to the TV.
Anynet
+
Menu
Description
View TV
Anynet
+
mode changes to TV broadcast mode.
Device List
Shows the device list.
(device_name) MENU
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear.
(device_name) INFO
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu
of the DVD recorder will appear.
Recording: (*recorder)
Starts recording immediately using the recorder. (This is only available for devices that support the
recording function.)
(*recorder) Reserve Recording
Enables reserving a recording for the recorder. (This is only available for devices that support the
recording reservation function.)
Stop Recording: (*recorder)
Stops recording.
Receiver
Sound is played through the receiver.
Continued...
Ap
p
lica
tio
n
Media Play (USB & DLNA)
(HDMI-CEC)
►
Content Library
Internet@TV
Home Network Centre
U
Move
E
Enter
R
Return
(HDMI-CEC)
: On
▶
Auto Turn Off
: Yes
U
Move
E
Enter
R
Return
View TV
Device List
Recording
: DVDR
DVDR MENU
DVDR INFO
Receiver
: On
Setup
2009-05-20 4:55:26
