manualshive.com logo in svg

Samsung PS-42P4H, Owner'S Instructions Manual, Page: 58 / 68

Share
Download
Samsung PS-42P4H Owner'S Instructions Manual Download Page 58

58

Installing the Speakers 

(continued)

ENG

➢

This speaker installation guide is for the 5040 Model. 

Parts

The actual product may differ
slightly from the illustration.

How to Assemble the Speakers(Standing)

①

Remove the screws indicated on the rear of the PDP (6 screws on the
left and right sides).

③

Secure the Speaker Dust Cover by setting it into the grooves
located on the front side of the speakers.

④

Connect the speakers to the PDP using the speaker cable. 
The connection terminals are on the rear side of both the PDP and
the speakers. (Match the color coded terminals and cables.)

②

Set the Speaker Guide Bracket into the square grooves located on
either side of the PDP’s bottom rear then push the Speaker Guide
Bracket towards the center (as the arrow illustrates). Secure the
Speaker Guide Bracket with provided screws 

➁

. (Always use the

proper screws, as indicated.)

Middle Cabinet

(Wall Mount Only)

1 EA

Speaker Dust Cover

1 EA

Speaker Cable

Screws

Screw

①

: 2EA

Screw

➁

: 6EA

BLACK

BLACK RED

RED

WARNING

1. When moving the PDP with the speakers attached, be sure to hold on to the PDP 

to prevent damage. (Damage may occur to the speaker connecting brackets or the 
speakers.)

2. Speakers of 8

Ω

Impedance, 15W Nom. Power, 30W Max. Power is recommended.

3. To connect the subwoofer speaker (sold separately), use the woofer output 

terminal on the rear side of the PDP.

Speakers

2 EA

Screw

➁

BN68-00624A-00_HD_ENG  2004.2.12  10:46 AM  Page 58

Summary of Contents for PS-42P4H





































































Reviews:

No comments