Samsung PS-42P4H, Owner'S Instructions Manual

Page: 15 / 68

15
This PDP’s remote control can operate VCR, CATV , DVD, or
Set-top box (STB), in addition to controlling the PDP.
➣
The remote control is not compatible with the TV
manufactured by another company.
1 Turn off your VCR, Cable box, DVD or STB.
2 Press the
SELECT
button.
Mode is changed whenever
SELECT
button is pressed.
3 Press the
POWER
( ) button on the remote control.
The component you select should turn on. If it turns on,
your remote control is now set correctly.
4 Once your remote control is set up, press the
SELECT
button any
time you want to use the remote control to operate your VCR,
Cable box, DVD or STB.
➣
When your remote control is in the VCR , CATV , DVD or
STB
mode, the volume buttons still control your television’s
volume.
Setting Up Your Remote Control
➢
To program the cable receiver controls:
◆
Press the
SELECT
button to select
CATV
.
◆ Point the remote control at the cable receiver and press
the
SET button. Then press the company code number(s)
for the component in page 64.
Ex)
If the component is manufactured by Oak, press 026.
➢
To program the
VCR
controls:
◆
Press the
SELECT
button to select
VCR
◆ Point the remote control at the
VCR
and press the
SET
button. Then press the company code number(s) for the
component in page 65.
➢
To program the
DVD
controls:
◆
Press the SELECT button to select DVD
◆
Point the remote control at the
DVD
and press the
SET
button. Then press the company code number(s) for the
component in page 64.
ENG
VCR
BN68-00624A-00_HD_ENG 2004.2.12 10:45 AM Page 15