English-4
Safety information
2
-2
Battery charger / Docking station
• Do not modify the polarized plug to fit a
non-polarized outlet or extension cord.
• Do not use outdoors or on wet surfaces.
• Unplug the Charger / docking station from
the outlet when not in use and before
servicing.
• Use only the Charger / docking station
supplied by the manufacturer to recharge.
• Do not use with a damaged cord or plug
or a loose power outlet.
• Do not pull or carry by the cord, use the
cord as a handle, close the door on the
cord, or pull the cord around sharp edges
or corners. Keep the cord away from
heated surfaces.
• Do not use extension cords or outlets with
inadequate current carrying capacity.
• Do not unplug by pulling on the cord. To
unplug, grasp the plug, not the cord.
• Do not mutilate or incinerate batteries as
they will explode at high temperatures.
• Do not attempt to open the Charger /
docking station. Repairs should only be
carried out by a qualified customer care
center.
• Do not expose the Charger / docking
station to high temperatures or allow
moisture or humidity of any kind to come
into contact with the charger / docking
station.
POWERbot
• Do not pick up hard or sharp objects such
as glass, nails, screws, coins, and etc.
• Do not use without a filter in place. When
servicing the unit, never put fingers or
other objects into the fan chamber in case
the unit accidentally turns on.
• Do not put any objects into openings.
Do not use with any openings blocked;
keep openings free of dust, lint, hair, and
anything that may reduce air flow.
• Do not pick up toxic materials (chlorine
bleach, ammonia, drain cleaner, etc.).
• Do not pick up anything that is burning or
smoke, such as cigarettes, matches, or hot
ashes.
• Do not use to pick up flammable or
combustible liquids such as gasoline or
use in areas where they may be present.
Also do not use in:
– Locations with candles or desk lamps on
the floor.
– Locations with unattended fires (fire or
embers).
– Locations with distilled alcohol, thinner,
ashtrays with burning cigarettes, etc.
• Do not use POWERbot in an enclosed
space filled with vapours given off by oil
based paint, paint thinner, moth proofing
substances, flammable dust, or other
explosive or toxic vapours.
• Leaks from battery cells can occur under
extreme usage or temperature conditions.
If the liquid gets on skin, wash quickly
with water. If the liquid gets into the
eyes, flush them immediately with clean
water for a minimum of 10 minutes. Seek
medical attention.
1_VR9300K_Q_guide_EN_00743M-06_ST.indd 4
2020-01-14 오후 10:24:16
Summary of Contents for POWERbot SR20K9350W Series
