Samsung PN43D490 E-Manual Download Page 38

Page: 38 / 243

▶ ◀

▶

English

Adding a Channel to the Channel List:

Select a deleted channel on the

All Channels

list, and then press the

ENTER

button.

Deleted channels are grayed out.

Press the

TOOLS

button on your remote. The Options menu appears.

Select

Add

, press

ENTER

, and then press

ENTER

again.

NOTE

●

Your TV will display all channels, including channels you deleted from the

Channel Manager

, on the

All Channels

list.

●

A gray-colored channel on the

All Channels

list indicates the channel has

been deleted from the

Channel Manager

●

The

Add

menu only appears for deleted channels.

Summary of Contents for PN43D490




















































































































































































































































Search results

Summary of Contents for PN43D490

Reviews:

Related manuals for PN43D490

Brands by name

Popular brands

Samsung PN43D490, E-Manual

Search results

Summary of Contents for PN43D490

Reviews:

Related manuals for PN43D490

Brands by name

Popular brands