Samsung PN43D490 E-Manual Download

Page: 187 / 243

◀

▶

English

◀

❑

Troubleshooting for

Problem

Possible Solution

does not work.

•

Check if the device is an device. The system
supports devices only.

•

You can connect only one receiver (home theater).

•

Check if the device power cord is properly connected.

•

Check the device’s Video/Audio/HDMI cable connections.

•

Check whether

(HDMI-CEC)

is set to

in the

setup menu.

•

Check whether the TV remote control is in TV mode.

•

Check whether the remote control is compatible.

•

doesn’t work in certain situations. (Searching channels,
operating

My Contents

Plug & Play

(initial setup), etc.)

•

If you have removed and the reconnected the HDMI cable, please
make sure to search devices again or turn your TV off and on again.

•

Check if the Function of the device is set on.

Summary of Contents for PN43D490




















































































































































































































































Search results

Summary of Contents for PN43D490

Reviews:

Related manuals for PN43D490

Brands by name

Popular brands

Samsung PN43D490, E-Manual

Search results

Summary of Contents for PN43D490

Reviews:

Related manuals for PN43D490

Brands by name

Popular brands