Samsung PN43D490 E-Manual Download Page 204

Page: 204 / 243

▶ ◀

▶

English

Other Restrictions

NOTE

●

Video content will not play, or not play correctly, if there is an error in the
content or the container.

●

Sound or video may not work if the contents have a standard bitrate/frame rate
above the compatible Frame/sec listed in the table above.

●

If the Index Table is in error, the Seek (Jump) function is not supported.

●

You may experience file stuttering while playing a video through a network
connection.

for PDP 550 Series and above

●

The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.

●

Some USB/digital camera devices may not be compatible with the TV.

●

Video content can not be played, if there are many contents in one file.

●

When you play video over a network connection, the video may not be played
smoothly.

Summary of Contents for PN43D490




















































































































































































































































Search results

Summary of Contents for PN43D490

Reviews:

Related manuals for PN43D490

Brands by name

Popular brands

Samsung PN43D490, E-Manual

Search results

Summary of Contents for PN43D490

Reviews:

Related manuals for PN43D490

Brands by name

Popular brands