Samsung PL63A750T1F User Manual Download Page 70

Page: 70 / 125

English - 70

Using the WISELINK Pro Function

Connecting a USB Device

You can view movies and photos and listen to music files stored on a USB

Mass Storage Class (MSC) device.

Press the

POWER

button on the remote control or front panel.

➢

The TV is powered on.

Connect a USB device containing JPEG and/or MP3 files to the

WISELINK jack (USB jack) on the side of the TV.

If you enter the WISELINK Pro mode with no USB device connected

the message

No external storage device found. Check the

connection status.

will appear. In this case, insert the USB device,

exit the screen by pressing the

W.LINK

button on the remote control and enter the WISELINK Pro screen again.

MTP (Media Transfer Protocol) is not supported.

The file system only supports FAT16/32 (The NTFS file system is not supported).

Certain types of USB Digital camera and audio devices may not be compatible with this TV.

Wiselink Pro only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)

Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be

a USB Compatibility problem.

Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.

SAMSUNG is not responsible for any data file damage or data loss.

Do not disconnect the USB device while it is loading.

MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.

The sequential jpeg format is supported.

Photo and audio files must be named in English, French or Spanish. If not, the files can not be played. Change

the file names to English, French or Spanish if necessary.

The higher the resolution of the image, the longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360x8640 pixels.

For unsupported or corrupted files, the

Not Supported File Format

message is displayed.

If the number of photo files exceeds 4000 (or the number of music files exceeds 3000), the files that exceed the

limit may not be displayed in the Photo List (or Music List).

MP3 files with DRM downloaded from pay sites are not played.

DRM can prevent illegal uses of digital media to protect its copyright and it encompasses any scheme to control

contents which range from making contents to contributing and managing. (ex. payment support)

➣

➣
➣
➣
➣

➣

➣
➣
➣
➣

➣
➣

WISELINK PRO

TV Side Panel

USB Drive

Using the Remote Control Button in WISELINK Pro Menu

Button

Operations

(Wheel)

Move the cursor and select an item.

(Enter)

Select the currently selected item. While playing a slide show, movie, or music file:

- Pressing the

ENTER

button during play pauses the play.

- Pressing the

ENTER

button during pause resumes the play.

Play or pause the Slide Show, Music or Movie file.

Return to the previous menu.

Run various functions from the Photo, Music and Movie menus.
Stop the current slide show, Music or Movie file.
Jump to previous group / Jump to next group.

Show file information.
Exit WISELINK Pro mode.

Stop WISELILNK Pro mode and Returns to TV mode.

Stop the current function and return to the WISELINK Pro main menu.

BN68-01731A-Eng.indb 70

2008-08-29 오전 9:43:52

Summary of Contents for PL63A750T1F






























































































































Search results

Summary of Contents for PL63A750T1F

Reviews:

Related manuals for PL63A750T1F

Brands by name

Popular brands

Samsung PL63A750T1F, User Manual

Search results

Summary of Contents for PL63A750T1F

Reviews:

Related manuals for PL63A750T1F

Brands by name

Popular brands