01
Getting Started
7
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The PDP device may interfere with an amateur radio or AM radio.
✎
When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the
TV to malfunction.
✎
The position of power input port may differ depending on the model.
Setup (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button.
Setup
is available only when the
Source
is set to TV.
✎
To start the
Setup
, enter the password using the remote control. The default password is 0-0-0-0.
✎
To return to the previous step, press the
Previous
button.
1. Menu Language
: Selecting a menu language
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the desired OSD (On Screen Display) language.
2. Use Mode
: Selecting the usage mode
Press the
▲
or
▼
button, then press the
ENTER
E
button.
• Select the
Home Use
mode.
Store Demo
Mode is for retail environments.
• When pressing TV controller, the function menu screen appears. Select the
MENU
(
m
) and press it more than 5 seconds
using the controller. The
Store Demo
mode is set. Cancel the
Store Demo
by selecting
Source
(
s
) and pressing it
more than 5 seconds.
•
Store Demo
is only for shop display. If you select it, several functions are not able to use. Please select
Home Use
when
you watch at home.
ANT OUT
VHF/UHF Antenna
Power Input
or
Cable
Antenna Cable (Not Supplied)
[PE400-ZS]BN68-04363C.indb 7
2012-03-27 �� 4:24:48
