Samsung Personal Computer User Manual Download Page 74

Page: 74 / 143

Chapter 3.

Using the computer

Using the TV

(Optional)

Products embedded with a TV tuner card (Optional) can use the

TV function.
After connecting to the antenna, you can watch TV by using the

corresponding TV program.

You can only use the TV function when the

TV tuner card

(Optional) is installed.

Connecting the TV Antenna

You must connect the

TV tuner card

(Optional) to the

antenna

. Connect the

antenna cable

to the

TV antenna input

port

Configuring the TV

The screenshots and terms used in the user manual may

•

differ from the actual ones.
The screen and menu titles of the TV program (ArcSoft TV)

•

may differ depending on the version.

Click

Start Screen

> TV programs (TV ArcSoft).

Click

Start

on the main screen.

The built-in TV tuner starts scanning channels available.

Summary of Contents for Personal Computer
















































































































































Search results

Summary of Contents for Personal Computer

Reviews:

Brands by name

Popular brands

Samsung Personal Computer, User Manual

Search results

Summary of Contents for Personal Computer

Reviews:

Brands by name

Popular brands