Samsung Personal Computer User Manual Download

Page: 71 / 143

Chapter 3.

Using the computer

Wired Network

Using the WOL (Wake On LAN) function

<Wake On LAN> is a function that activates the system from Sleep

mode when a signal (such as a ping or magic packet command)

arrives over the network (wired LAN).

Click

Charms menu

on the Desktop

> Settings

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

Control Panel > Network and Internet > Network and

Sharing Center

and click on

Change adapter settings

the left menu pane.

Right-click on the

Wired Ethernet Connection

and select

Properties

Click

Configure > Power Management

tab.

Select Allow

this device to wake the computer

, then click

. Restart

the system.

If the system wakes up from Sleep mode even though there

is no received signal, use the system after disabling the

<Wake On LAN> function.

The LAN LED may not be turned off if System is shoutdown

without disabling the WOL (Wake on LAN) option.

Connecting a wired LAN while using a wireless LAN may not
activate the

<Wake On LAN> function. Set the Wireless LAN

Disable

to use the <Wake On LAN> function.

- <Wake On LAN> feature may not work while using Hybrid

power saving feature. Hybrid sleep mode can be disabled

from

Power Options

under

Control Panel

Wake On LAN

activated by

Ping

is not supported.

When connected to a 100Mbps/1Gbps wired LAN and the

computer exits Sleep/hibernation mode, a message appears

informing you of a connection to a 10Mbps/100Mbps

wired LAN. This happens because when the computer exits

standby/hibernate mode, restoring the network takes about

3 seconds. When the network is restored, it operates at

100Mbps/1Gbps.

When system is running on battery, some time it may take

a few second extra after inserting LAN cable to be able to

connect to internet. This symptom happen as a result of

power saving feature to reduce battery consumption.

When system is running on battery, the Wired LAN speed

is decreased automatically to reduce battery consumption.

In such case, a 1Gbps /100Mbps LAN would function at

100Mbps/10Mbps speed.

Summary of Contents for Personal Computer
















































































































































Search results

Summary of Contents for Personal Computer

Reviews:

Related manuals for Personal Computer

Brands by name

Popular brands

Samsung Personal Computer, User Manual

Search results

Summary of Contents for Personal Computer

Reviews:

Related manuals for Personal Computer

Brands by name

Popular brands