Samsung Personal Computer User Manual Download

Page: 68 / 143

Chapter 3.

Using the computer

Adjusting the Volume

Using SoundAlive (Optional)

The SoundAlive function enables you to experience more

stereophonic sound using stereo speakers.

The software programs provider may vary, depending on

•

your computer model.
In addition, some pictures may differ from actual product

•

depending on the computer model and software version.

Right-click over the

Volume

in the taskbar on the Desktop

and click

Play Device

(Alternatively, click the

Charms menu

on the

Desktop >

Settings

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

> Control Panel > Hardware and Sound >

Sound

Right-click over the

Speakers

and select

Properties

Select the

SoundAlive

tab and select one of the modes.

Summary of Contents for Personal Computer
















































































































































Search results

Summary of Contents for Personal Computer

Reviews:

Related manuals for Personal Computer

Brands by name

Popular brands

Samsung Personal Computer, User Manual

Search results

Summary of Contents for Personal Computer

Reviews:

Related manuals for Personal Computer

Brands by name

Popular brands