manualshive.com logo in svg

Samsung Personal Computer, User Manual

Share
Download
Samsung Personal Computer User Manual Download Page 67

66

Chapter 3.  

Using the computer

Adjusting the Volume

You can control the volume with the volume control program.

Using the touch button

Tap the touch button 

 to control the volume.

Adjusting the Volume using the Volume 

Adjustment Program

Click the 

Charms menu > Settings 

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

 > 

⦽

 

to adjust the control 

bar.

Mute

Using the Sound Recorder

The procedures to record sound using the Windows Recorder are 

described below.

1

  Connect a microphone to the microphone jack.

Or use built-in microphone.

2

  Right-click over the 

Volume

 icon   on the taskbar and select 

Recording Device

.

3

  Check if the microphone is set as the default recording 

device.
If this is the case, it is already set as the default device. If not, 

right-click over the microphone and select 

Set default

.

4

  Click the bottom-left icon 

 on the 

Start

 screen, and then 

click 

Sound Recorder

.

Click 

Start recording

.

Summary of Contents for Personal Computer
















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands