Samsung OfficeServ SOHO User Manual Download

Page: 69 / 75

CONVENIENT FEATURES

Calling Line Identification Presentation (CLIP)

This function displays the caller ID on the LCD of the phone.

CLIP is a pay service provided by the telephone company. Such information may not be

provided in the following cases:

- Caller requested the telephone company not to disclose his/her ID.

- Call was made from an area where the CLIP service is not provided(e.g., international

calls).

- Call was made from a public phone.

- Caller information provided by the telephone company is damaged.

- The telephone company does not serve CLIP.

[PSTN]

Select [Menu]

[Phone Setup]

[5. Global Setup]

[1. Feature On.Off]

[3. CID

Detection] to display Caller ID.

[ISDN]

It is not need the additional settings, CID is displayed if the network is serviced the CLIP

Summary of Contents for OfficeServ SOHO












































































Search results

Summary of Contents for OfficeServ SOHO

Reviews:

Related manuals for OfficeServ SOHO

Brands by name

Popular brands

Samsung OfficeServ SOHO, User Manual

Search results

Summary of Contents for OfficeServ SOHO

Reviews:

Related manuals for OfficeServ SOHO

Brands by name

Popular brands