OfficeServ 7100
INSTALLATION
TECHNICAL MANUAL
PART 3 MAY 2010
3.16
receives/transmits data from/to Intranet or Internet. The 4SWM provides four 10/100 Base-T
Ethernet ports and performs the Layer 2 Switching function. These four ports support Power Over
Ethernet (PoE) and are IEEE 802.3af compliant.
Power constraints must be taken into consideration when plugging ITP/SMT-i phones and
WAP devices into the 4SWM PoE module.
•
The OfficeServ 7100 power supply supports a maximum of 24 TDM phones or SEPU
(Samsung equivalent power units). One power unit is equal to one (2 line TDM phone).
•
A maximum of 4 ITP/SMT-i phones or 4 WAPs can be supported by the 4SWM PoE module.
•
Each time an ITP/SMT-i phone is plugged into the 4SWM PoE port, the system capacity for
TDM phones is decreased by 5.
•
Each time a WAP is plugged into the 4SWM PoE port, the system capacity for TDM phones
is decreased by 6.
•
External power can be used to power the ITP/SMT-i phones and WAPs. If external power is
used to supply power to the ITP/SMT-i phones or WAPs, no SEPU are used from the
OS7100 4SWM PoE module.
POWER CONSUMPTION
OS7100 Samsung Equivalent Power Units (SEPU)
Devices
KSU Power Units
Optional Power
iDCS Phones
1
N/A
DS 5000 Phones
1
N/A
ITP/SMT-i Phones
5
AC adapter or External
PoE Switch
SMT 5000 WAPs
6
AC adapter or External
PoE Switch
If you need more than 4 Ethernet ports, you can uplink this to an external Layer 2 data switch
providing additional ports.
Home Page
Table of Contents
Home Page
Table of Contents
