warranty and service _
39
w
arra
NT
y a
N
d ser
v
IC
e
What should I do if, after the cooking zones have been
Check for the following possibility:
•
The cooking zone was only briefly used and therefore did not
become hot enough. If the cooking zone is hot, please call the
customer service centre.
What should I do if the cooking zone will not switch on or off?
This could be due to one of the following possibilities:
•
The control panel is partially covered by a damp cloth or liquid.
•
The child safety lock is on.
What should I do if the
display is illuminated?
What should I do if the display is illuminated?
Check for the following:
•
Cookware is unsuitable or too small or no cookware has been
placed on the cooking zone
•
If you use suitable cookware, displayed message will automatically
disapear.
What should I do if the cooling fan runs after the hob is
turned off?
Check for the following:
Check for the following:
The hob is overheated because of abnormal operation.
After hob is cooled down, press the “On/Off” control
sensor for resetting.
•
•
•
If you request a service call because of an error made in operating
the appliance, the visit from the customer service technician may
incur a charge even during the warranty period.
continue to run 1 minute by itself for cooling down.
When you have fnished using the hob, the cooling fan will
switched off, residual warmth is not indicated in the display?
2016-12-20
Summary of Contents for NZ64M3707AN
