Samsung NX58R9311SS/AA, User Manual

Page: 38 / 144

38 English
Tr
ouble
shoo
ting
Troubleshooting
Problem Possible cause Solution
The oven light
(lamp) will not turn
on. The oven door lock is
turned on. The display will show the
Lock icon. Hold the oven door
open, and then press the
START/SET pad for 3 seconds.
The oven will beep and the
Lock icon will turn off.
The Sabbath function has
been activated. SAb and the time of day
will show in the display. All
other controls and signals
will be deactivated. To cancel
the Sabbath function and
reactivate the light switch and
other controls, press and hold
the
Bake and Number 1 pads
simultaneously for 3 seconds.
A loose or burned-out
bulb. See page 33 .
The switch operating the
oven light needs to be
replaced. Call for a qualified service
technician.
The oven smokes
excessively during
broiling. Meat or food was not
properly prepared before
broiling. Cut away excess fat and/or
fatty edges that may curl.
Improperly positioned
top oven rack. See the broiling guide on page
20 .
The controls are not
being set properly. See page 19 .
Greasy buildup on oven
surfaces. Regular cleaning is necessary
when broiling frequently.
Problem Possible cause Solution
Cooking is
finished, but the
cooling fan is still
running. The fan automatically
runs for a certain amount
of time to ventilate the
inside of the oven. This is not a product
malfunction. The fan is
designed to run automatically
for a period of time to cool
down the oven.
The oven will not
self-clean. The oven door lock is
turned on. The display will show the
Lock icon. Hold the oven door
open, and then press the
START/SET pad for 3 seconds.
The oven will beep and the
Lock icon will turn off.
The oven is too hot. Let the oven cool down, and
then reset the controls. The
self-clean cycle will not lock
the oven door if the oven
temperature is too hot. The
door must lock before the self-
clean cycle can start.
The self-cleaning oven
controls are not properly
set. Reset the self-cleaning oven
controls. (See page
31 .)
A surface burner is on. Turn off the surface burner.
Self-clean will not operate if a
surface burner is on.
A crackling or
popping sound. This is normal. This is the sound of the metal
heating and cooling during
any cooking or cleaning
function.
NX58R9311SS_AA_DG68-00905B-00_EN+MES+CFR.indb 38 2019-05-30 6:11:15