44
4. Troubleshooting
This document can not be used without Samsung’s authorization.
This document can not be used without Samsung’s authorization.
SYMPTOM
DIAGNOSIS
REMEDY
Oven temperature
rises too fast.
*
The oven temperature exceeds
400˚F(202˚C) within 10 minutes of
room temperature operation.
*
Repair or replace the faulty broil or bake
relay.
*
Make sure the harness is wired
correctly and does not have a short
circuit in it.
*
Repair or replace the harness.
*
Make sure the oven burner orifices
are sized properly for the type of gas
being used.
*
Replace with properly sized orifices:
Burner NG
LP
Orifice
mm
mm
Broil
1.64
1.02
Bake
1.90
1.15
NOTE:
High-altitude orifice kits are available.
*
Replace the PCB.
Oven is
overheating in all
cooking modes.
*
“E-0A” will show on the display if the
oven temperature reaches 650°F
(343°C) in any cooking function,
except self clean.
*
Check the source control relay (RY01) and
replace if it is not working properly.
*
Make sure all harness wires are securely
fastened.
*
Check the resistance of oven temperature
sensor connector on the PCB. (Normal :
2850Ω)
*
Replace the PCB.
Membrane control
keypads are not
working properly.
*
Make sure the door lock feature is
not turned on.
*
Unlock the controls by pressing and
holding the lock key for 3 or more
seconds.
*
Check to see if the sabbath function
has been turned on.
*
Press and hold the Sabbath pad for at least
3 seconds. The display will show the time of
day when the function is turned off.
*
Check the membrane control
harness and connectors (CN08)
on the PCB and membrane control
panel.
*
Reconnect securely or replace damaged
membrane control harness.
*
Check connector (CN08) and/or
the PCB for damage.
*
Check the membrane control panel
for damage.
*
Replace the PCB assembly.
(PCB and membrane control panel
.)